D-Link NetDefend DFL-260E, Reference Manual

Page: 291 / 328

3.113. ServiceICMP
Description
An ICMP Service is an object definition representing ICMP traffic with specific parameters.
Properties
Name Specifies a symbolic name for the service.
(Identifier)
MessageTypes Specifies the ICMP message types that are
applicable to this service. (Default: All)
EchoRequest Enable matching of Echo Request messages.
(Default: No)
EchoRequestCodes Specifies which Echo Request message codes
should be matched. (Default: 0-255)
DestinationUnreachable Enable matching of Destination Unreachable
messages. (Default: No)
DestinationUnreachableCodes Specifies which Destination Unreachable message
codes should be matched. (Default: 0-255)
Redirect Enable matching of Redirect messages. (Default:
No)
RedirectCodes Specifies which Redirect message codes should be
matched. (Default: 0-255)
ParameterProblem Enable matching of Parameter Problem messages.
(Default: No)
ParameterProblemCodes Specifies which Parameter Problem message codes
should be matched. (Default: 0-255)
EchoReply Enable matching of Echo Reply messages. (Default:
No)
EchoReplyCodes Specifies which Echo Reply message codes should
be matched. (Default: 0-255)
SourceQuenching Enable matching of Source Quenching messages.
(Default: No)
SourceQuenchingCodes Specifies which Source Quenching message codes
should be matched. (Default: 0-255)
TimeExceeded Enable matching of Time Exceeded messages.
(Default: No)
TimeExceededCodes Specifies which Time Exceeded message codes
should be matched. (Default: 0-255)
ForwardICMPErrors Allow ICMP errors for active connections to be
forwarded through the system. (Default: No)
EnableIPv4PathMTUDiscovery Path MTU Discovery allows communicating
Chapter 3: Configuration Reference
291