manualshive.com logo in svg

D-Link NetDefend DFL-260E, Reference Manual, Page: 57 / 328

Share
Download
D-Link NetDefend DFL-260E Reference Manual Download Page 57

-srcif=<Interface>

Interface used to reach the remote endpoint.

-stat

Show verbose information.

-tunnel=<IPsecTunnel>

IPsec interface.

-tunnels

Show information on configured tunnels.

-verbose

Show verbose information.

<ip address>

IP address of remote SG/peer.

<IPsecTunnel>

IPsec interface.

2.2.40. ikesnoop

Enable or disable IKE-snooping.

Description

Turn IKE on-screen snooping on/off. Useful for troubleshooting IPsec connections.

Usage

ikesnoop

Show IKE snooping status.

ikesnoop -on [<ip address>] [-verbose]

Enable IKE snooping.

ikesnoop -off

Disable IKE snooping.

Options

-off

Turn IKE snooping off.

-on

Turn IKE snooping on.

-verbose

Enable IKE snooping with verbose output.

<ip address>

IP address to snoop.

Deprecated

(2014-05-27) Replaced by command

ike -snoop

. Deprecated commands may be

removed in future releases.

2.2.41. ippool

Chapter 2: Command Reference

57

Summary of Contents for NetDefend DFL-260E









































































































































































































































































































































Reviews:

No comments