Use an IP6 Address item to define a name for a specific IP6 host, network or range.
Properties
Name
Specifies a symbolic name for the network object.
(Identifier)
Address
IPv6 address, e.g. "2001:DB8::/32".
ActiveAddress
The dynamically set address used by e.g. DHCPv6
enabled Ethernet interfaces. (Optional)
Comments
Text describing the current object. (Optional)
3.2.1.7. IP4Address
Description
Use an IP4 Address item to define a name for a specific IP4 host, network or range.
Properties
Name
Specifies a symbolic name for the network object.
(Identifier)
Address
IP address, e.g. "172.16.50.8", "192.168.7.0/24" or
"172.16.25.10-172.16.25.50".
ActiveAddress
The dynamically set address used by e.g. DHCP
enabled Ethernet interfaces. (Optional)
UserAuthGroups
Groups and user names that belong to this object.
Objects that filter on credentials can only be used
as source networks and destinations networks in
rules. (Optional)
NoDefinedCredentials
If this property is enabled the object requires user
authentication, but has no credentials (user names
or groups) defined. This means that the object only
requires that a user is authenticated, but ignores
any kind of group membership. (Default: No)
Comments
Text describing the current object. (Optional)
3.2.1.8. IP4Group
Description
An IP4 Address Group is used for combining several IP4 Address objects for simplified
management.
Properties
Name
Specifies a symbolic name for the network object.
(Identifier)
Chapter 3: Configuration Reference
113
Summary of Contents for NetDefend DFL-260E
Page 21: ...Chapter 1 Introduction 21...
Page 104: ...Chapter 2 Command Reference 104...
Page 240: ...Comments Text describing the current object Optional Chapter 3 Configuration Reference 240...
Page 317: ...Comments Text describing the current object Optional Chapter 3 Configuration Reference 317...
