D-Link NetDefend DFL-260E Reference Manual Download Page 280

Page: 280 / 328

3.106. RouteBalancingSpilloverSettings

Description

Settings associated with the spillover algorithm.

Properties

Interface

Interface to threshold limit. (Identifier)

HoldTime

Number of consecutive seconds over/under the
threshold limit to trigger state change for the
affected routes. (Default: 30)

OutboundThreshold

Outbound threshold limit. (Optional)

OutboundUnit

The outbound units. (Default: kbps)

InboundThreshold

Inbound threshold limit. (Optional)

InboundUnit

The inbound units. (Default: kbps)

Comments

Text describing the current object. (Optional)

Chapter 3: Configuration Reference

280

Summary of Contents for NetDefend DFL-260E









































































































































































































































































































































Search results

Summary of Contents for NetDefend DFL-260E

Reviews:

Related manuals for NetDefend DFL-260E

Brands by name

Popular brands

D-Link NetDefend DFL-260E, Reference Manual

Search results

Summary of Contents for NetDefend DFL-260E

Reviews:

Related manuals for NetDefend DFL-260E

Brands by name

Popular brands