D-Link NetDefend DFL-260E Reference Manual Download Page 186

Page: 186 / 328

3.49. HTTPPoster

Description

Use the HTTP poster for dynamic DNS or automatic logon to services using web-based
authentication.

Properties

URL

The URL that will be posted when the firewall is
loaded.

RepostDelay

Delay in seconds until the URL is refetched.
(Default: 1200)

AlwaysRepost

Repost on each reconfiguration. (Default: No)

PostValues

HTTP POST the values. (Default: No)

Comments

Text describing the current object. (Optional)

Note

If no

Index

is specified when creating an instance of this type, the object will be placed

last in the list and the

Index

will be equal to the length of the list.

Chapter 3: Configuration Reference

186

Summary of Contents for NetDefend DFL-260E









































































































































































































































































































































Search results

Summary of Contents for NetDefend DFL-260E

Reviews:

Related manuals for NetDefend DFL-260E

Brands by name

Popular brands

D-Link NetDefend DFL-260E, Reference Manual

Search results

Summary of Contents for NetDefend DFL-260E

Reviews:

Related manuals for NetDefend DFL-260E

Brands by name

Popular brands