D-Link NetDefend DFL-260E Reference Manual Download Page 309

Page: 309 / 328

3.126. UpdateCenter

Description

Configure automatical updates.

Properties

AVEnabled

Automatic updates of antivirus definitions and
engine. (Default: No)

IDPEnabled

Automatic updates of IDP signatures. (Default: No)

UpdateInterval

Specifies the interval at which the automatic
update runs. (Default: Daily)

UpdateDate

Specifies the day of month when the automatic
update is run.

UpdateWeekday

Specifies the day of week when the automatic
update is run. (Default: mon)

Hourly

Specifies the number of hours between periodical
updates.

UpdateHour

Specifies the hour when the update is run. (Default:
0)

UpdateMinute

Specifies the minute when the update is run.
(Default: 0)

Comments

Text describing the current object. (Optional)

Note

This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.

Chapter 3: Configuration Reference

309

Summary of Contents for NetDefend DFL-260E









































































































































































































































































































































Search results

Summary of Contents for NetDefend DFL-260E

Reviews:

Related manuals for NetDefend DFL-260E

Brands by name

Popular brands

D-Link NetDefend DFL-260E, Reference Manual

Search results

Summary of Contents for NetDefend DFL-260E

Reviews:

Related manuals for NetDefend DFL-260E

Brands by name

Popular brands