D-Link NetDefend DFL-260E Reference Manual Download Page 260

Page: 260 / 328

precedence 7 (the highest precedence). (Optional)

LimitPPS7

Specifies

the

packet

per

second

limit

for

precedence 7 (the highest precedence). (Optional)

UserLimitKbpsTotal

Total bandwidth limit per group in the pipe in
kilobits per second. (Optional)

UserLimitPPSTotal

Total throughput limit per group in the pipe in
packets per second. (Optional)

UserLimitKbps0

Specifies the bandwidth limit per group in kbps for
precedence 0 (the lowest precedence). (Optional)

UserLimitPPS0

Specifies the throughput limit per group in PPS for
precedence 0 (the lowest precedence). (Optional)

UserLimitKbps1

Specifies the bandwidth limit per group in kbps for
precedence 1. (Optional)

UserLimitPPS1

Specifies the throughput limit per group in PPS for
precedence 1. (Optional)

UserLimitKbps2

Specifies the bandwidth limit per group in kbps for
precedence 2. (Optional)

UserLimitPPS2

Specifies the throughput limit per group in PPS for
precedence 2. (Optional)

UserLimitKbps3

Specifies the bandwidth limit per group in kbps for
precedence 3. (Optional)

UserLimitPPS3

Specifies the throughput limit per group in PPS for
precedence 3. (Optional)

UserLimitKbps4

Specifies the bandwidth limit per group in kbps for
precedence 4. (Optional)

UserLimitPPS4

Specifies the throughput limit per group in PPS for
precedence 4. (Optional)

UserLimitKbps5

Specifies the bandwidth limit per group in kbps for
precedence 5. (Optional)

UserLimitPPS5

Specifies the throughput limit per group in PPS for
precedence 5. (Optional)

UserLimitKbps6

Specifies the bandwidth limit per group in kbps for
precedence 6. (Optional)

UserLimitPPS6

Specifies the throughput limit per group in PPS for
precedence 6. (Optional)

UserLimitKbps7

Specifies the bandwidth limit per group in kbps for
precedence 7 (the highest precedence). (Optional)

UserLimitPPS7

Specifies the throughput limit per group in PPS for
precedence 7 (the highest precedence). (Optional)

Grouping

Grouping

enables

per-port/IP/network

static

bandwidth limits as well as dynamic balancing
between groups. (Default: None)

Chapter 3: Configuration Reference

260

Summary of Contents for NetDefend DFL-260E









































































































































































































































































































































Search results

Summary of Contents for NetDefend DFL-260E

Reviews:

Related manuals for NetDefend DFL-260E

Brands by name

Popular brands

D-Link NetDefend DFL-260E, Reference Manual

Search results

Summary of Contents for NetDefend DFL-260E

Reviews:

Related manuals for NetDefend DFL-260E

Brands by name

Popular brands