D-Link NetDefend DFL-260E, Reference Manual

Page: 132 / 328

LogResolveFailure Specifies whether or not to log failed ARP Resolves.
(Default: Yes)
NDRateLimit Rate limit originated ND packets. (Default: 1000)
MaxAnycastDelayTime Randomized time to delay proxied and anycast
advertisements. (Default: 100)
NDMatchEnetSender Ignore ND packets with mismatching sender- and
options MAC-addresses. (Default: Yes)
NDValSenderIP Validate the IP source address of the ND packet.
(Default: Yes)
NDLogResolveSuccess Specifies whether or not to log when ND Resolve
succeeds. (Default: No)
NDChanges Action to take when ND packets are received that
would modify an existing entry. (Default: FavorOld)
StaticNDChanges Action to take when ND packets are received that
would modify a static entry. (Default: DropLog)
NDValidation Action to take when the stateless validation of a
ND packet fail. (Default: DropLog)
NDCacheSize Number of cached IP/L2 address tuples. (Per iface).
(Default: 1024)
NDMaxMulticastSolicit Number of Neighbor Solicitations before giving up
address resolution. (Default: 3)
NDMaxUnicastSolicit Number of Neighbor Solicitations before giving up
a zombie during dead peer detection. (Default: 3)
NDBaseReachableTime Multiple of randomized time factor in seconds,
resulting in the time before a ND entry becomes a
zombie. (Default: 30)
NDDelayFirstProbeTime Time in seconds for a cache entry to go from
DELAY to PROBE state unless resolved. (Default: 5)
NDRetransTimer Number of seconds between each Neighbor
Solicitation during address resolution and dead
peer detection. (Default: 1)
RAMaxInterval Maximum time between sending unsolicited
multicast Router Advertisement. (Default: 600s).
(Default: 600)
RAMinInterval Minimum time between sending unsolicited
multicast Router Advertisement. Will be
automatically adjusted if set to less than 3 seconds
or greater than .75 * Max RA Interval). (Default: 200)
RAAutoLifetime Auto adjust the Router Lifetime field using the
following formula; 3 * Max RA Interval. (Default:
Yes)
RADefaultLifetime The value to be placed in the Router Lifetime field
of Router Advertisements sent from the SGW, in
seconds. (Default: 1800s). (Default: 1800)
Chapter 3: Configuration Reference
132