3.123. StateSettings
Description
Parameters for the state engine in the system.
Properties
ConnReplace
What to do when the connection table is full.
(Default: ReplaceLog)
LogOpenFails
Log packets that are neither part of open
connections nor valid new connections. (Default:
Yes)
LogReverseOpens
Log reverse connection attempts through an
established connection. (Default: Yes)
LogStateViolations
Log packets that violate stateful tracking rules; for
instance, TCP connect sequences. (Default: Yes)
LogConnections
Log connections opening and closing. (Default:
Log)
LogConnectionUsage
Log for every packet that passes through a
connection. (Default: No)
MaxConnections_Dynamic
Allocate the Max Connection value dynamically.
(Default: Yes)
MaxConnections
Maximum number of simultaneous connections.
(Default: 8192)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Chapter 3: Configuration Reference
304
Summary of Contents for NetDefend DFL-260E
Page 21: ...Chapter 1 Introduction 21...
Page 104: ...Chapter 2 Command Reference 104...
Page 240: ...Comments Text describing the current object Optional Chapter 3 Configuration Reference 240...
Page 317: ...Comments Text describing the current object Optional Chapter 3 Configuration Reference 317...
