D-Link DXS-3250 - xStack Switch - Stackable Page 51 Cli Manual Download

Page: 51 / 466

D-Link CLI Reference Guide

Page 50

bridge multicast forward-all

The

bridge multicast forward-all

Interface Configuration (VLAN) mode command enables forwarding all

multicast packets on a port. To restore the default configuration, use the

form of this

command.

Syntax

bridge multicast forward-all

{

add

remove

}

{

ethernet

interface-list

port-channel port-channel-number-list

}

no bridge multicast forward-all

Parameters
•

add

— Force forwarding all multicast packets.

•

remove

— Do not force forwarding all multicast packets.

•

interface-list

— Separate nonconsecutive Ethernet ports with a comma and no spaces; a hyphen is used to

designate a range of ports.

•

port-channel-number-list

— Separate nonconsecutive port-channels with a comma and no spaces; a hyphen

is used to designate a range of port-channels.

Default Configuration

This setting is disabled.

Command Mode

Interface Configuration (VLAN) mode

User Guidelines

There are no user guidelines for this command.

Example

In this example, all multicast packets on port 1/8 are forwarded.

Console(config)#

interface vlan 2

Console(config-if)#

bridge multicast forward-all add

ethernet

1/8

Summary of Contents for DXS-3250 - xStack Switch - Stackable


















































































































































































































































































































































































































































































Search results

Summary of Contents for DXS-3250 - xStack Switch - Stackable

Reviews:

Related manuals for DXS-3250 - xStack Switch - Stackable

Brands by name

Popular brands

D-Link DXS-3250 - xStack Switch - Stackable, Cli Manual

Search results

Summary of Contents for DXS-3250 - xStack Switch - Stackable

Reviews:

Related manuals for DXS-3250 - xStack Switch - Stackable

Brands by name

Popular brands