D-Link DXS-3250 - xStack Switch - Stackable, Cli Manual

Page: 441 / 466

D-Link CLI Reference Guide
Page 440
Section 31. 802.1x Commands
aaa authentication dot1x default
The aaa authentication dot1x Global Configuration mode command specifies one or more authentication,
authorization, and accounting (AAA) methods for use on interfaces running IEEE 802.1X. To return to the default
configuration, use the
no form of this command.
Syntax
aaa authentication dot1x default method1 [ method2 ...]
no aaa authentication dot1x default
Parameters
•
method1 [ method2 ...] — At least one from the following table:
Default Configuration
No authentication method is defined.
Command Mode
Global Configuration mode
User Guidelines
Additional methods of authentication are used only if the previous method returns an error and not if the request
for authentication is denied. To ensure that authentication succeeds even if all methods return an error, specify
none as the final method in the command line.
The RADIUS server must support MD-5 challenge and EAP type frames.
Examples
The following example uses the aaa authentication dot1x default command with no authentication.
Keyword Description
Radius Uses the list of all RADIUS servers for authentication
None Uses no authentication
Console(config)# aaa authentication dot1x default none