D-Link DXS-3250 - xStack Switch - Stackable Page 360 Cli Manual Download

Page: 360 / 466

Syslog Commands

Page 359

show logging file

The

show logging file

Privileged EXEC mode command displays the state of logging and the syslog messages

stored in the logging file.

Syntax

show logging file

Default Configuration

This command has no default configuration.

Command Mode

Privileged EXEC mode

User Guidelines

There are no user guidelines for this command.

Example

The following example displays the logging state and the syslog messages stored in the logging file.

Console#

show logging file

Logging is enabled.

Console logging: level debugging. Console Messages: 0 Dropped (severity).

Buffer logging: level debugging. Buffer Messages: 11 Logged, 200 Max.

File logging: level notifications. File Messages: 0 Dropped (severity).

Syslog server 192.180.2.27 logging: errors. Messages: 6 Dropped (severity).

Syslog server 192.180.2.28 logging: errors. Messages: 6 Dropped (severity).

2 messages were not logged (resources)

Application filtering control

Application

Event

Status

-----------

-----

------

AAA

Enabled

File system

Copy

Enabled

File system

Delete-Rename

Enabled

Management ACL

Deny

Enabled

Buffer log:

11-Aug-2004 15:41:43: %LINK-3-UPDOWN: Interface FastEthernet0/0, changed state to up

11-Aug-2004 15:41:43: %LINK-3-UPDOWN: Interface Ethernet1/0, changed state to up

11-Aug-2004 15:41:43: %LINK-3-UPDOWN: Interface Ethernet1/1, changed state to up

Summary of Contents for DXS-3250 - xStack Switch - Stackable


















































































































































































































































































































































































































































































Search results

Summary of Contents for DXS-3250 - xStack Switch - Stackable

Reviews:

Related manuals for DXS-3250 - xStack Switch - Stackable

Brands by name

Popular brands

D-Link DXS-3250 - xStack Switch - Stackable, Cli Manual

Search results

Summary of Contents for DXS-3250 - xStack Switch - Stackable

Reviews:

Related manuals for DXS-3250 - xStack Switch - Stackable

Brands by name

Popular brands