D-Link DXS-3250 - xStack Switch - Stackable Page 87 Cli Manual Download

Page: 87 / 466

D-Link CLI Reference Guide

Page 86

Section 6. Configuration and Image File Commands

copy

The

copy

Privileged EXEC mode command copies files from a source to a destination.

Syntax

copy

source-url destination-url

Parameters
•

source-url

— The source file location URL or reserved keyword of the source file to be copied.

(Range: 1-160 characters)

•

destination-url

— The destination file URL or reserved keyword of the destination file.

(Range: 1-160 characters)

The following table displays keywords and URL prefixes:

Default Configuration

This command has no default configuration.

K e y w o r d

S o u r c e o r D e s t i n a t i o n

flash:

Source or destination URL for flash memory. It’s the default in case a URL is specified
without a prefix.

running-config

Represents the current running configuration file.

startup-config

Represents the startup configuration file.

image

If the source file, represents the active image file. If the destination file, represents the
non-active image file.

boot

Boot file.

tftp://

Source or destination URL for a TFTP network server. The syntax for this alias is

tftp://

host/[directory]/filename

. The host can be represented by its IP address or hostname.

xmodem:

Source for the file from a serial connection that uses the Xmodem protocol.

unit://member/
image

Image file on one of the units. To copy from the master to all units, specify * in the member
field.

unit://member/
boot

Boot file on one of the units. To copy from the master to all units, specify * in the member
field.

null:

Null destination for copies or files. A remote file can be copied to null to determine its size.

backup-config

Represents the backup configuration file.This is a user-defined name for up to four backup
configuration files.

unit://member/
backup-config

Backup configuration on one of the units.

Summary of Contents for DXS-3250 - xStack Switch - Stackable


















































































































































































































































































































































































































































































Search results

Summary of Contents for DXS-3250 - xStack Switch - Stackable

Reviews:

Related manuals for DXS-3250 - xStack Switch - Stackable

Brands by name

Popular brands

D-Link DXS-3250 - xStack Switch - Stackable, Cli Manual

Search results

Summary of Contents for DXS-3250 - xStack Switch - Stackable

Reviews:

Related manuals for DXS-3250 - xStack Switch - Stackable

Brands by name

Popular brands