D-Link DXS-3250 - xStack Switch - Stackable Cli Manual Download Page 20

Page: 20 / 466

Using the CLI

Editing Features

Page 19

Note

It is the user’s responsibility to ensure that the text copied into the device consists of legal commands only.

This feature is dependent on the baud rate of the device.

When copying and pasting commands from a configuration file, make sure that the following conditions exist:

•

A device Configuration mode has been accessed.

•

The commands contain no encrypted data, like encrypted passwords or keys. Encrypted data cannot be

copied and pasted into the device.

Summary of Contents for DXS-3250 - xStack Switch - Stackable


















































































































































































































































































































































































































































































Search results

Summary of Contents for DXS-3250 - xStack Switch - Stackable

Reviews:

Brands by name

Popular brands

D-Link DXS-3250 - xStack Switch - Stackable, Cli Manual

Search results

Summary of Contents for DXS-3250 - xStack Switch - Stackable

Reviews:

Brands by name

Popular brands