D-Link DXS-3250 - xStack Switch - Stackable, Cli Manual

Page: 58 / 466

Address Table Commands
Page 57
show bridge address-table
The show bridge address-table Privileged EXEC mode command displays all entries in the bridge-forwarding
database.
Syntax
show bridge address-table [ vlan vlan ] [ ethernet interface | port-channel port-channel-number ][ address mac-
address ]
Parameters
•
vlan — Specifies a valid VLAN, such as VLAN 1.
•
interface — A valid Ethernet port .
•
port-channel-number — A valid port-channel number.
•
mac-address — A valid MAC address in the format H.H.H.H.H.H or H:H:H:H:H:H or H-H-H-H-H-H
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Internal usage VLANs (VLANs that are automatically allocated on ports with a defined Layer 3 interface) are
presented in the VLAN column by a port number and not by a VLAN ID.
"Special" MAC addresses that were not statically defined or dynamically learned are displayed in the MAC
address table. This includes, for example, MAC addresses defined in ACLS.
Example
In this example, all classes of entries in the bridge-forwarding database are displayed.
Console# show bridge address-table
Aging time is 300 sec
interface mac address Port Type
--------- -------------- ---- -------
1 00:60:70:4C:73:FF 5/8 dynamic
1 00:60:70:8C:73:FF 5/8 dynamic
200 00:10:0D:48:37:FF 5/9 static