D-Link DXS-3250 - xStack Switch - Stackable, Cli Manual

Page: 222 / 466

QoS Commands
Page 221
policy-map
The policy-map Global Configuration mode command creates a policy map and enters the Policy-map
Configuration mode. To delete a policy map, use the no form of this command.
Syntax
policy-map policy-map-name
no policy-map policy-map-name
Parameters
•
policy-map-name — Specifies the name of the policy map.
Default Configuration
If the packet is an IP packet, the DCSP value of the policy map is 0.
If the packet is tagged, the CoS value is 0.
Command Mode
Global Configuration mode
User Guidelines
Before configuring policies for classes whose match criteria are defined in a class map, use the policy-map
Global Configuration mode command to specify the name of the policy map to be created or modified.
Class policies in a policy map can only be defined if match criteria has already been defined for the classes. Use
the
class-map Global Configuration and match Class-map Configuration commands to define the match criteria
of a class.
Only one policy map per interface per direction is supported. A policy map can be applied to multiple interfaces
and directions.
Example
The following example creates a policy map called policy1 and enters the Policy-map Configuration mode.
Console (config)# policy-map policy1
Console (config-pmap)#