3 Getting Started
DGS-1210 series Metro Ethernet Managed Switch User Manual
1
1
7
7
Figure 3.1 – Connected Ethernet cable
Accessing the Web-based Management Interface
In order to access the management interface, the PC must have an IP address in the same subnet as the
switch. For example, if the switch has an IP address of
10.90.90.90
, the PC should have an IP address of
10.x.y.z
(where x/y is a number between 0 ~ 254 and z is a number between 1 ~ 254), and a subnet mask of
255.0.0.0
. To launch the web interface, simply open any compatible web browser and enter
10.90.90.90
(the
factory-default IP address) in the address bar. Then press <Enter>.
Figure 3.2 –Enter the IP address 10.90.90.90 in the web browser
NOTE:
The switch's factory default IP address is
10.90.90.90 with a subnet mask of 255.0.0.0 and
a default gateway of 0.0.0.0.
When the following logon dialog box appears, enter the password and choose the language of the Web-
based Management interface then click
OK
.
By default, the Username and Password are empty.
Figure 3.3 – Logon Dialog Box
Web-based Management
Please refer to Chapter 4
D-Link Network Assistant (DNA)
D-Link Network Assistant (DNA) is a program that is used to discover switches which are in the same Layer
2 network segment as your PC. You can download the DNA App from the Chrome web store and install it in
a Chrome web browser.
1.
Go to the Chrome web store at:
https://chrome.google.com/webstore
, and search the store for
Network Assistant.
Summary of Contents for DGS-1210 Series
Page 159: ...140 ...