4 Configuration
DGS-1210 series Metro Ethernet Managed Switch User Manual
148
Figure 4.231 – L3 Functions > IPv6 Static Route
IPv6 Address / Prefix Length:
Specifies an IPv6 address to be assigned to the static route.
Nexthop Address:
Specifies the corresponding IPv6 address for the next hop gateway address in IPv6
format.
Metric (1-65535):
Specifies a metric of the IPv6 interface into the table representing the number of routers
between the Switch and the IPv6 address above. The value ranges between 1 and 65535.
Backup State:
Each IPv6 address can only have one primary route, while other routes should be assigned
to the backup state. When the primary route failed, the Switch will try the backup routes according to the
order learnt by the routing table until route success. This field represents the backup state for the IPv6
configured. This field may be
Primary
or
Backup
.
Click
Add
to create a new IPv6 static route entry.
L3 Functions > IPv6 Routing Table Finder
The IPv6 routing table stores all the external routes information of the Switch. The
IPv6 Routing Table
Finder
page displays all the routing information on the Switch.
Figure 4.232 – L3 Functions > IPv6 Routing Table Finder
Network Address;
Specifies the destination network address of the route to be displayed.
Click
Search
to display the information of specified route entry.
Summary of Contents for DGS-1210 Series
Page 159: ...140 ...
