4 Configuration
DGS-1210 series Metro Ethernet Managed Switch User Manual
1
1
2
2
1
1
Figure 4.186 - Monitoring > Errors > Transmitted (TX) (line graph)
To view the
Transmitted Error Packets Table
, click the link
View Table
, which will show the following table:
Figure 4.187 - Monitoring > Errors > Transmitted (TX) (table)
The following fields can be set or viewed:
Time Interval:
Select the desired setting between
1s
and
60s
, where “s” stands for seconds. The default
value is
one
second.
Record Number:
Select number of times the Switch will be polled between
20
and
200
. The default value is
200
.
ExDefet:
Counts the number of packets for which the first transmission attempt on a particular interface was
delayed because the medium was busy.
CRC Error:
Counts otherwise valid packets that did not end on a byte (octet) boundary.
LateColl:
Counts the number of times that a collision is detected later than
512
bit-times into the
transmission of a packet.
ExColl:
Excessive Collisions. The number of packets for which transmission failed due to excessive
collisions.
SingColl:
Single Collision Frames. The number of successfully transmitted packets for which transmission is
inhibited by more than one collision.
Coll:
An estimate of the total number of collisions on this network segment.
Show/Hide:
Check whether or not to display ExDefer, LateColl, ExColl, SingColl, and Coll errors.
Clear:
Clicking this button clears all statistics counters on this window.
View Table:
Clicking this button instructs the Switch to display a table rather than a line graph.
View Line Chart:
Clicking this button instructs the Switch to display a line graph rather than a table.
Summary of Contents for DGS-1210 Series
Page 159: ...140 ...
