D-Link DGS-1210 Series User Manual Download Page 132

Page: 132 / 159

4 Configuration

DGS-1210 series Metro Ethernet Managed Switch User Manual

Figure 4.194 - Monitoring > IGMP Snooping > IGMP Snooping Host

VLAN Name:

Specify the name of the VLAN for which to be displayed the IGMP Snooping Host information.

VID (1-4094):

Specify the list of the VLAN IDs for which to be displayed the IGMP Snooping Host information.

Port: Specify the ports of IGMP Snooping Host information to be displayed.

Group: Specify the group of IGMP Snooping Host information to be displayed.

Click

Find

to display the information.

Monitoring > MLD Snooping > MLD Snooping Group

The MLD Snooping Group page allows user to configure the MLD Snooping group settings.

Figure 4.195 - Monitoring > MLD Snooping > MLD Snooping Group

VLAN Name:

Specify the VLAN name for MLD Snooping group.

VID:

Specify the VID for MLD Snooping group.

Group IP Address:

Specify the IP address for the specified VLAN.

Click

Find Vlan

to locate a specific entry based on the information entered.

Click

View All

to display all the existing entries.

Click

View All Data Driven

to display all existing entire entries.

Click

Clear All Data Driven

to clear data driven information for all entries.

Monitoring > Port Access Control > RADIUS Authentication

This table contains information concerning the activity of the RADIUS authentication client on the client side
of the RADIUS authentication protocol. It has one row for each RADIUS authentication server that the client
shares a secret with.

Summary of Contents for DGS-1210 Series































































































































































Search results

Summary of Contents for DGS-1210 Series

Reviews:

Related manuals for DGS-1210 Series

Brands by name

Popular brands

D-Link DGS-1210 Series, User Manual

Search results

Summary of Contents for DGS-1210 Series

Reviews:

Related manuals for DGS-1210 Series

Brands by name

Popular brands