D-Link DGS-1210 Series User Manual Download Page 131

Page: 131 / 159

4 Configuration

DGS-1210 series Metro Ethernet Managed Switch User Manual

124

Port:

Select the port to be viewed.

Port List:

Enter a list of ports. Tick the

All Ports

check box to select all ports.

Click

Find

to locate a specific entry based on the information entered.

Click

Clear

to clear all the information entered in the fields.

Monitoring > Ethernet OAM > Browse Ethernet OAM Statistics

The Browse Ethernet OAM Statistics page displays the ports Ethernet OAM statistics information.

Figure 4.192 - Monitoring > Ethernet OAM > Browse Ethernet OAM Statistics

Port List: Enter a list of ports. Tick the

All Ports

check box to select all ports.

Click

Clear

to clear all the information entered in the fields.

Monitoring > IGMP Snooping > IGMP Snooping Group

The IGMP Snooping Group page is used to display the current IGMP snooping static group information on
the Switch.

Figure 4.193 - Monitoring > IGMP Snooping > IGMP Snooping Group

VLAN Name:

Specify the name of the VLAN for which to be displayed the IGMP Snooping Group

information.

VID:

Specify the list of the VLAN IDs for which to be displayed the IGMP Snooping Group information.

Group IP Address:

Specify the static group address for which to be displayed the IGMP Snooping static

group information.

Click

Find VLAN

to display the IGMP group information or click

Clear Data Driven

to clear the IGMP group

information.

Monitoring > IGMP Snooping > IGMP Snooping Host

The IGMP Snooping Host page allows user to display the information of IGMP Snooping Host.

Summary of Contents for DGS-1210 Series































































































































































Search results

Summary of Contents for DGS-1210 Series

Reviews:

Related manuals for DGS-1210 Series

Brands by name

Popular brands

D-Link DGS-1210 Series, User Manual

Search results

Summary of Contents for DGS-1210 Series

Reviews:

Related manuals for DGS-1210 Series

Brands by name

Popular brands