D-Link DGS-1210 Series User Manual Download Page 52 | Manualshive

Page: 52 / 159

background image

4 Configuration

DGS-1210 series Metro Ethernet Managed Switch User Manual

4

4

5

5

Select

Enabled

of Asymmetric VLAN and click

Apply

to change to Asymmetric VLAN mode:

Figure 4.57 - Configuration > 802.1Q VLAN > VID Assignments

Configuration > Private VLAN > Private VLAN Settings

A private VLAN is comprised of a primary VLAN, up to one isolated VLAN, and a number of community
VLANs. A private VLAN ID is presented by the VLAN ID of the primary VLAN. The command used to
associate or deassociate a secondary VLAN with a primary VLAN.

A secondary VLAN cannot be associated with multiple primary VLANs. The untagged member port of the
primary VLAN is named as the promiscuous port. The tagged member port of the primary VLAN is named as
the trunk port. A promiscuous port of a private VLAN cannot be promiscuous port of other private VLANs.
The primary VLAN member port cannot be a secondary VLAN member at the same time, or vice versa. A
secondary VLAN can only have the untagged member port. The member port of a secondary VLAN cannot
be member port of other secondary VLAN at the same time. When a VLAN is associated with a primary
VLAN as the secondary VLAN, the promiscuous port of the primary VLAN will behave as the untagged
member of the secondary VLAN, and the trunk port of the primary VLAN will behave as the tagged member
of the secondary VLAN. A secondary VLAN cannot be specified with advertisement. Only the primary VLAN
can be configured as a layer 3 interface. The private VLAN member port cannot be configured with the traffic
segmentation function.

The Private VLAN Settings page allows the user to configure the Private VLAN settings.

Figure 4.58 - Configuration > Private VLAN > Private VLAN Settings

Add Private VLAN:

Specify to add a private VLAN of the Switch.

VLAN Name:

Enter a VLAN name for the private VLAN to be created. This name can be up to

32

characters

in length.

VID (2-4094):

Enter a VLAN ID for the private VLAN to be created. The value ranges between 2 and 4094.

VLAN List:

Enter a list of VLAN ID for the private VLAN to be created.

Click

Add

to add a new entry based on the information entered.

«
...
50
51
52
53
54
...
»

Summary of Contents for DGS-1210 Series
































































































































































Reviews:

No comments

Related manuals for DGS-1210 Series

Brand: H3C Pages: 34

Brand: Falcon Pages: 24

Brand: FS Pages: 19

PowerBeam AC Gen2

Brand: Ubiquiti Pages: 22

BIC 1I12-P2A25-M30MI1-BPX05-110

Brand: Balluff Pages: 12

Brand: Justec Pages: 61

Brand: Xenya Pages: 189

Brand: B+B SmartWorx Pages: 52

Brand: Abocom Pages: 63

Brand: Conel Pages: 32

Brand: Ozenda Pages: 116

Brand: Comet Labs Pages: 11

Brand: BinTec Pages: 34

Brand: DIGIWEB Pages: 16

EdgeRouter ER-8

Brand: Ubiquiti Pages: 20

Network Adapter ADZIFCF

Brand: Addonics Technologies Pages: 1

Brand: Juniper Pages: 396

Brand: Matrix Switch Corporation Pages: 54

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands