4 Configuration
DGS-1210 series Metro Ethernet Managed Switch User Manual
136
-
Burst Size: Specify the committed Burst Size of the packet. The range is from 0 to 1016 kbyte.
Rate Exceed:
Specifies the action when the packet is in yellow color mode.
-
Drop Packet: Drops the packet.
-
Replace DSCP: Allow user to change the DSCP of the packet.
Click Apply to make the configurations take effect.
PoE > PoE Port Settings (DGS-1210-10P/28P/28MP/52P/52MP/52MPP/ME only)
DGS-1210-10P/28P/28MP/52P/52MP/52MPP/ME supports Power over Ethernet (PoE) as defined by the
IEEE specification.DGS-1210-10P/ME supplies power to PD device up to 30W, DGS-1210-28P/ME supplies
power to PD device up to 15.4W for port 5~24 and 30W for port 1~4, DGS-1210-28MP/ME supplies power to
PD device up to 30W for port 1~24, DGS-1210-52P/ME supplies power to PD device up to 15.4W for port
9~24 and 30W for port 1~8, DGS-1210-52MP/ME supplies power to PD device up to 15.4W for port 9~48
and 30W for port 1~8, and DGS-1210-52MPP/ME supplies power to PD device up 30W for port 1~48,
meeting IEEE802.3af standards and pre-802.3at standards.
DGS-1210-10P/28P/28MP/52P/52MP/52MPP/ME works with all D-Link 802.3af or 802.3at capable devices.
The Switch also works in PoE mode with all non-802.3af capable D-Link AP, IP Cam and IP phone
equipment via the PoE splitter DWL-P50.
IEEE 802.3at defined that the PSE provides power according to the following classification:
Class Usage
Output power limit by PSE
0
Default
15.4W
1
Optional
4.0W
2
Optional
7.0W
3
Optional
15.4W
4
Reserved 30W
The PoE port table will display the PoE status including, Port Enable, Power Limit, Power (W), Voltage (V),
Current (mA), Classification, Port Status. You can select
From Port
/
To Port
to control the PoE functions of
a port. DGS-1210-10P/28P/28MP/52P/52MP/52MPP/ME will auto disable the ports if port current is over
375mA in 802.3af mode or 625mA in pre-802.3at mode.
Note:
The PoE Status information of Power
current, Power Voltage, and Current is the power
usage information of the connected PD; please
"Refresh" to renew the information.
Note:
For DGS-1210-10P/ME, the port 1 ~ port 8 are compliance
with 802.3at. The total PoE budget is 78 Watts.
For DGS-1210-28P/ME, the port 1 ~ port 4 are compliance with
802.3at, and the port 5 ~ port 24 are compliance with 802.3af. The
total PoE budget is 193 Watts.
For DGS-1210-28MP/ME, the port 1 ~ port 24 are compliance with
802.3at and 802.3af. The total PoE budget is 370 Watts.
For DGS-1210-52P/ME, the port 1 ~ port 8 are compliance with
802.3at, and the port 9 ~ port 24 are compliance with 802.3af. The
total PoE budget is 193 Watts.
For DGS-1210-52MP/ME, the port 1 ~ port 8 are compliance with
802.3at, and the port 9 ~ port 48 are compliance with 802.3af. The
total PoE budget is 370 Watts.
For DGS-1210-52MPP/ME, the port 1 ~ port 48 are compliance with
802.3at. The total PoE budget is 740 Watts.
Summary of Contents for DGS-1210 Series
Page 159: ...140 ...
