4 Configuration
DGS-1210 series Metro Ethernet Managed Switch User Manual
1
1
0
0
1
1
Figure 4.150 – Security > Access Authentication control > Application Authentication Settings
Application:
Lists the configuration applications on the Switch. The user may configure the Login Method
List and Enable Method List for authentication for Console, Telnet application, SSH and the WEB (HTTP)
application.
Login Method List:
Using the pull-down menu, configure an application for normal login on the user level,
utilizing a previously configured method list. The user may use the default Method List or other Method List
configured by the user.
Enable Method List:
Using the pull-down menu, configure an application for normal login on the user level,
utilizing a previously configured method list. The user may use the default Method List or other Method List
configured by the user.
Click
Apply
to implement configuration changes.
Security > Access Authentication Control > Authentication Server Group
A server group is a technique used to group and RADIUS server hosts into user-defined
categories for authentication using method lists. The user may define the type of server group by protocol or
by previously defined server group. The Switch has three built-in Authentication Server Groups that cannot
be removed but can be modified.
To add a user-defined group to the list, click the
Add
button in the
Authentication Server Group
page.
Figure 4.151 – Security > Access Authentication control > Authentication Server Group
Simply enter a group name of no more than 15 alphanumeric characters to define the user group to add.
After clicking
Apply
, the new user-defined group will be displayed in the
Server Group
table. Here, it can be
configured as the user desires.
F
The Switch has two built-in Authentication Server Groups that cannot be removed but can be modified. To
modify a particular group, click
Edit
button, which will then display the following window.
Figure 4.152 – Security > Access Authentication control > Authentication Server Group-Edit
Select
Group Name
,
Protocol
and
IP address
then click
Add
to implement the changes.
Summary of Contents for DGS-1210 Series
Page 159: ...140 ...
