4 Configuration
DGS-1210 series Metro Ethernet Managed Switch User Manual
94
Figure 4.137 – Security > Smart Binding > Smart Binding
The Manual Binding Settings contains the following fields:
From Port / To Port:
Specifies the port ranges for MAC address to bind to the IP address of Binding list.
IP Address:
Specifies the IP address to bind to the MAC address set below.
MAC Address:
Specifies the MAC address to bind to the IP address set above.
Click
Add
to add a new entry.
Auto Scan:
Specifies to scan connected devices in a range of IP address.
IP Address From/To:
Specifies the range of IP Address to scan all devices in the network.
Click
Scan
and the search results will be listed in below table.
Binding:
check the box to select desired binding devices.
Apply:
click
Apply
to set IP-MAC-Port Binding entries.”
Select All:
to check the boxes of Binding for all found devices.
Clear All:
to cancel the box of Binding.
Security > Smart Binding > White List
When IP+ARP Inspection Mode were selected, the White List page displays finished IP-MAC-Port Binding
entries from page Smart Binding. Only IP packets or ARP packets carrying matched IP-MAC-Port
information can access to the switch. You can cancel a device’s authorization by deleting it from the table.
Figure 4.138 – Security > Smart Binding > White List
Click
Select All
to select all entries of the table or click
Clean
to select none entries. Please keep at least
one management host in the White List.
Security > Smart Binding > Black List
The Black List page shows unauthorized accesses. When ARP Inspection is selected and a device sends
out an ARP packet containing unmatched IP-MAC-Port information, the device will be forbidden and listed
here.
Summary of Contents for DGS-1210 Series
Page 159: ...140 ...