Chapter 58 RERP Configuration Commands
DES-7200 CLI Reference Guide
58-2
Usage
guidelines
Only when the global RERP is enabled, the configuration of other
parameters will take effect.
Examples
The following example shows how to enable RERP:
DES-7210(config)#
rerp enable
Related
commands
Command
Description
rerp region
Create a RERP domain.
58.1.2
rerp hello-interval
Use this command to configure the interval at which the RERP sends the Hello message on
the primary port. Use the
no
form of this command to restore it to the default value.
rerp hello-interval
interval
no rerp hello-interval
Parameter
description
Parameter
Description
interval
Interval of sending the Hello message, in the
range 1 to 6 seconds
Default
1 seconds.
Command
mode
Global configuration mode.
Usage
guidelines
The detection interval must be less than the failure time.
Examples
The following example shows how to set the interval as 2s:
DES-7210(config)#
rerp hello-interval
2
Related
commands
Command
Description
rerp fail-interval
Configure the timeout time.
Summary of Contents for DES-7200
