D-Link DES-7200, Cli Reference Manual

Page: 68 / 1180

Chapter 2 Switch Management Configuration Commands DES-7200 CLI Reference Guide
2-22
DES-7210# show line console 0
CON Type speed Overruns
* 0 CON 9600 45927
Line 0, Location: "", Type: "vt100"
Length: 24 lines, Width: 79 columns
Special Chars: Escape Disconnect Activation
^^x none ^M
Timeouts: Idle EXEC Idle Session
never never
History is enabled, history size is 10.
Total input: 53564 bytes
Total output: 395756 bytes
Data overflow: 27697 bytes
stop rx interrupt: 0 times
2.2.16 write
To perform the read/write operation for the device configurations (startup configuration or
system configuration), execute the privileged user command
write
.
write [ memory | network | terminal ]
Parameter
description
Parameter Description
memory
Write the system configuration (running-config)
into NVRAM, which is equivalent to copy
running-config startup-config .
network
Save the system configuration into the TFTP
server, which is equivalent to copy
running-config tftp .
terminal
Show the system configuration, which is
equivalent to show running-config .
Command
mode Privileged mode.
Usage
guidelines
Despite of the alternative command, these commands have been
widely used and accepted, so they are reserved to facilitate user's
operation.
The no form with the command is equivalent to add the memory
operation.
Examples
The example below saves the device configuration:
DES-7210# write