D-Link DES-7200, Cli Reference Manual, Page: 813 / 1180

DES-7200 CLI Reference Guide Chapter 42 MPLS Configuration Commands
42-37
2.2.2.2 -> 10.30.10.10 (ldp): passive, xmit/recv
LDP Ident: 10.30.10.10:0
Local LDP Identifier: The LDP identifier for the local router.
Interfaces : The interface information lists discovered by the active
LDP.
Xmit: The Hello messages sent on the interface.
recv: The Hello messages received on the interface. Targeted
Hellos: The sending path lists for all targeted hello messages.
active: The local LSR sends targeted Hello messages actively.
passive: The neighbor LSR sends targeted Hello messages actively
and the local LSR responses.
Related
commands
Command Description
show mpls ldp
interface
Show the LDP-enabled interface information.
42.1.36 show mpls ldp neighbor
Use this command to show the LDP neighbor information.
show mpls ldp neighbor
Command
mode
Privileged user mode.
Usage
guidelines
Show all LDP neighbors including the TCP connection port between
the local LDP and peer LDP, LDP status, received/sent message
count, ect.
Examples
DES-7210# show mpls ldp neighbor
Peer LDP Ident: 10.20.10.10:0; Local LDP Ident: 8.8.8.8:0
TCP connection: 10.20.10.10.62488 - 8.8.8.8.646
State: OPERATIONAL; Msgs sent/recv: 42/45; UNSOLICITED
Up time: 00:33:49
LDP discovery sources:
Link Peer on GigabitEthernet 2/1, Src IP addr: 192.168.201.220