D-Link DES-7200, Cli Reference Manual, Page: 855 / 1180

DES-7200 CLI Reference Guide Chapter 43 Port-based Flow Control Configuration Commands
43-1
43
Port-based Flow Control
Configuration
Commands
43.1 Configuration Related Commands
Port security module configuration includes the following commands:

strom-control

switchport protected

protected-ports route-deny

switchport port-security

switchport port-security aging

switchport port-security mac-address

arp-check
43.1.1 storm-control
Use this command to enable the storm suppression. Use the no form of the command to
disable the storm suppression.
storm-control {broadcast | multicast | unicast} [{level percent | pps p a c k e t s | rate-bps }]
no storm-control {broadcast|multicast|unicast}[{level percent | pps
p a c k e t s | rate-bps }]
Parameter
description
Parameter Description
broadcast Enable the broadcast storm suppression function.
multicast Enable the unknown unicast storm suppression
function.
unicast Enable the unknown unicast storm suppression
function.