D-Link DES-7200, Cli Reference Manual

Page: 469 / 1180

DES-7200 CLI Reference Guide Chapter 32 OSPFv2 Configuration Commands
32-69
DES-7210# show ip ospf neighbor detail
Neighbor 3.3.3.3, interface address 192.88.88.72
In the area 0.0.0.0 via interface FastEthernet 1/0
Neighbor priority is 1, State is Full, 11 state changes
DR is 192.88.88.27, BDR is 192.88.88.72
Options is 0x52 (*|O|-|EA|-|-|E|-)
Dead timer due in 00:00:32
Neighbor is up for 05:11:27
Database Summary List 0
Link State Request List 0
Link State Retransmission List 0
Crypt Sequence Number is 0
Thread Inactivity Timer on
Thread Database Description Retransmission off
Thread Link State Request Retransmission off
Thread Link State Update Retransmission off
Thread Poll Timer on
The fields in the displayed results of the show ip ospf neighbor
command are described as follows:
Field Description
Neighbor ID Neighbor ID
Pri Neighbor priority (for selection of DR)
State Neighbor status
Dead Time
Remaining time for the neighbor to enter the
Dead status
Address
The corresponding interface address of the
neighbor
Interface The corresponding interface of the neighbor
interface address
The interface address of the neighbor
device
In the area Show the area that learns the neighbor.
via interface Show the interface that learns the neighbor
Neighbor priority Priority of the neighbor OSPF