D-Link DES-7200, Cli Reference Manual, Page: 416 / 1180

Chapter 32 OSPFv2 Configuration Commands DES-7200 CLI Reference Guide
32-16
default-information originate .
Examples
The configuration example below configures the initial metric of the
OSPF redistributed route as 50.
Switch(config)# router rip
DES-7210(config-router)# network 192 . 168 . 12 . 0
Switch(config-router)# version 2
DES-7210(config-router)# exit
DES-7210(config)# router ospf
DES-7210(config-router)# network 172.16.10.0 0.0.0.255 area 0
Switch(config-router)# default-metric 50
DES-7210(config-router)# redistribute rip subnets
Related
commands
Command Description
redistribute
Redistribute the routes of other routing
processes.
show ip ospf Show the OSPF global configuration information.
32.1.14 distance ospf
Use this command to set the management distance of different types of routes.
distance ospf { intra-area < 1-255 > | inter-area < 1-255 > | external < 1-255 >}
no distance ospf
Parameter
description
Parameter Description
intra-area
< 1-255 >
Set the management distance of the inner-area
route, 110 default.
inter-area
< 1-255 >
Set the management distance of the inter-area
route, 110 default.
external < 1-255 >
Set the management distance of the external
route, 110 default.
Default
The default value is 110.
Command
mode Routing process configuration mode.
Usage
guidelines
This command is used to specify different management distances for
different types of OSPF routes.