D-Link DES-7200, Cli Reference Manual

Page: 1128 / 1180

Chapter 63 File System Configuration Commands DES-7200 CLI Reference Guide
63-2
Usage
guidelines
Change the above parameter to the directory you want to enter. Use
the ―..‖ to represent the upeer-level directory and the ―.‖ to represent
the current-level directory. Others can be determined according to the
current location. This command supports relative directories and
absolute directories. After entering the specified directory, you can
verify it by using the ls command described above.
Examples
Enter the tmp sub-directory of the current directory:
DES-7210# cd tmp
Related
commands
Command Description
ls Show the contents in the current directory.
63.1.2 cp
Use this command to copy a file to the specified file or directory.
cp dest { destine_file | directory } sour source_file
cp sour source_file dest { destine_file | directory }
Parameter
description
Parameter Description
destine_file Destination file
directory Destination file or directory
source_file Name of the file to copy (including the path)
Default N/A.
Command
mode Privileged EXEC mode.
Usage
guidelines
Copy the specified file to a new file or a directory. If the file already
exists, the system will prompt whether to overwrite to cancel the
operation.
Caution
The current cp command does not support the wildcard and directory copy.