D-Link DES-7200, Cli Reference Manual, Page: 577 / 1180

DES-7200 CLI Reference Guide Chapter 34 Protocol-independent Configuration Commands
34-13
seq-number
Sequence number of an entry in the
prefix list. Its range is 1 to 4294967294.
If the sequence number is not specified
in this command, the system will
allocate a default one for the entry. The
default sequence number of the first
entry is 5, and that of each subsequent
one is the product of adding 5 to the
sequence number of the proceeding
entry.
Permit
Permit the access to the matching
result.
deny
Deny the access to the matching result.
Ipv6-prefix
Network address and its mask. The
network address can be any valid IP
address. The mask can be 0 to 32
characters.
minimum-prefix-
length
(Optional) Minimum length of the prefix
(the starting length)
Note:
―ge‖ indicates the operation of
―larger than‖ and ―equivalent to‖.
maximum-prefix
- length
(Optional) Maximum length of the prefix
(the ending length)
Note:
―le‖ indicates the operation of
―less than‖ and ―equivalent to‖.
Default
configuration No prefix list is created.
Command
mode
Global configuration mode
Usage
guideline
The ipv6 prefix-list command configures the prefix list,
with the permit or deny keyword to determine the action
in case of matching.
You can execute this command to define an exact match,
or use
―ge‖ or ― le‖ to define a range match for a prefix for
flexible configuration.
―ge‖ indicates the range of
minimum-prefix-length to 32;
―le‖ indicates the range of the
mask length of the IP prefix to maximum-prefix-length;