D-Link DES-7200, Cli Reference Manual, Page: 361 / 1180

DES-7200 CLI Reference Guide Chapter 31 RIP Configuration Commands
31-1
31
RIP Configuration
Commands
31.1 Configuration Related Commands
31.1.1 address-family (RIP)
Use this command to set the RIP protocol in the address family configuration sub-mode.
The no form of this command closes the address family sub-mode.
address-family ipv4 vrf vrf-name
no address-family ipv4 vrf vrf-name
Parameter
description
Parameter Description
vrf vrf-name
Specify the VRF name associated with the
sub-mode command.
Default
configuration The address family of the RIP protocol is not configured.
Command
mode Route configuration mode.
Usage
Guidelines
You can use the address-family command to enter the address
family configuration sub-mode. The prompt is (config-router-af)# .
When you specify the VRF associated with the sub-mode for the first
time, the RIP instance corresponding to the VRF will be created. In
the sub-mode, you can configure the VRF RIP routing settings.
To exit the address family sub-mode and return to the route
configuration mode, execute the exit-address-family or exit
command.