D-Link DES-7200, Cli Reference Manual, Page: 1038 / 1180

Chapter 54 ACL Configuration Commands DES-7200 CLI Reference Guide
54-30
Parameter
description
Parameter Description
id
ID of the IP ACL (1 to 199, 1300 to 2699)
name
Name of the IP ACL
in
Filter the incoming packets of the interface.
out
Filter the outgoing packets of the interface.
Default
configuration No ACL is applied on the interface.
Command
mode Interface configuration mode.
Usage
guidelines N/A.
Examples
The following example applies the ACL 120 on the fastEthernet0/0 to
filter the incoming packets:
DES-7210(config)# interface fastEthernet 0/0
DES-7210(config-if)# ip access-group 120 in
Related
commands
Command Description
access-list Define the ACL.
show access-lists Show all the ACLs.
show ip access-list Show the IP ACL (1 to 199, 1300 to 2699,
3000 to 3199).
Platform
description The software version must be R10.0 and higher.
54.1.12 mac access-group
Use this command to apply the specified MAC ACL on the specified interface. Use the no
form of the command to remove the application.
mac access-group { id | name }{ in | out }