D-Link DES-7200, Cli Reference Manual

Page: 825 / 1180

DES-7200 CLI Reference Guide Chapter 42 MPLS Configuration Commands
42-49
commands
ip vrf Create a VRF instance
show ip vrf Show the VRF configurations
42.2.9 maximum routes
Use this command to limit the maximum routes within the vrf. Use the no form of this
command to cancel this limit.
maximum routes limit {
warn-threshold
|
warning-only
}
no maximum routes
Parameter
description
Parameter Description
limit
Limit the routes. The routes which exceed the
limits will not be written into the core route
table, ranging from 1 to 4294967295.
warn-threshold
Print the warning threshold, It will print the
warning after the percent is reached,
ranging from 1 to 100.
warning-only
After the configured limit is reached, it only
prints the warning. But it is still allowed to
add to the core route table.
Default
configuration
There is no limit for the configuration by default.
Command
mode
VRF configuration mode
Usage
guidelines
This command is used to limit the allowed routes within the VRF. If it
only hopes to get the warning, use the warning-only parameter.