D-Link DES-7200, Cli Reference Manual, Page: 599 / 1180

DES-7200 CLI Reference Guide Chapter 34 Protocol-independent Configuration Commands
34-35
level-1 | level-2
Redistribute the
ISIS level-1
or level-2 routes.
Default
configuration None
Command
mode Route map configuration mode
Usage
guideline
You can redistribute the routing information from one routing process
to another routing process. For example, you can redistribute the
route in the OSPF routing domain and then advertise it to the RIP
routing domain, and vice versa. The mutual route redistribution can
be implemented between all the IP routing protocols.
In the route redistribution, route maps are usually used to control the
mutual route redistribution between two routing domains.
In configuring one route map, one or more match or set commands
can be executed. If the match command is not used, all the routes will
be matched. If the set command is not used, no operation will be
performed.
Examples
In the example below, the RIP routing protocol redistributes only the
internal routes in the OSPF routing domain.
router rip
redistribute ospf route-map redrip
network 192.168.12.0
route-map redrip permit 10
match route-type internal
!
Related
commands
Command Description
access-list
Set the access list.
match ip address Match the IP address.
match interface
Match the interface.