Hardware
FM0+ S6E1C-Series Starter Kit Guide, Doc. # 002-10542 Rev. *C
18
NOR flash memory
Stereo codec
RGB LED
User button
Arduino compatible headers
Multicon interface
3.3 Hardware Details
3.3.1 FM0+Series MCU
The S6E1C-Series Starter Kit features an ultra-low-power, highly integrated S6E1C3 MCU, a
32-bit ARM® Cortex®-M0+ MCU.
The S6E1C3 MCU is a member of the S6E1C-Series device family with 40MHz CPU, 128KB
flash, 16KB SRAM and 54 GPIOs. The S6E1C3 MCU features a wide variety of peripherals such
as timers, 12-bit SAR ADC and communication interfaces like USB (host and device), CSIO
(SPI), I2S, I2C (slave only) and UART.
3.3.2 User Button and LED
The FM0+ S6E1C-Series Starter Kit features a user button and an RGB LED. The switch and the
LED are connected to the S6E1C3 MCU via pins mentioned in
Table 3-1: Button and LED
Pin No.
Port
External device
5
P30
SW2
14
P3D
LED4
– Red
15
P3E
LED4
– Green
16
P3F
LED4
– Blue
The port P3D/P3E/P3F are also assigned as the PWM output pins, and user can dim the LED
by configuring the base timers in PWM mode to output PWM signals from the pins.
Summary of Contents for FM0+ S6E1C-Series
Page 49: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 49 Figure A 2 CMSIS DAP USB...
Page 50: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 50 Figure A 3 Stereo Codec...
Page 51: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 51 Figure A 4 Interfaces...
