Installation and Test Operation
FM0+ S6E1C-Series Starter Kit Guide, Doc. # 002-10542 Rev. *C
13
4. Select the baud rate
115200
, and click the
Disconnected
button to connect to the board.
Figure 2-6: Select the Baud Rate
5. Press the
Enter
key on your keyboard to run the test procedure. Key in the option number
and press the
Enter
key to run the test.
Figure 2-7: Test Procedure
6. For example, key in
2
and press the
Enter
key on the PC keyboard. The color of the RGB
LED will change from red to green to blue.
Figure 2-8: RGB LED Test
Summary of Contents for FM0+ S6E1C-Series
Page 49: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 49 Figure A 2 CMSIS DAP USB...
Page 50: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 50 Figure A 3 Stereo Codec...
Page 51: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 51 Figure A 4 Interfaces...
