Software Development
FM0+ S6E1C-Series Starter Kit Guide, Doc. # 002-10542 Rev. *C
30
4.1.2 Open the Example Projects in Keil µVision IDE
The following steps describe how to open, build and run an example project in Keil µVision IDE.
Before proceeding, please check the availability of the flash loader file of the S6E1C3 device
(
S6E1C32X0.FLM
) in this directory:
<Keil_Install_Directory>:\ARM\flash.
If the flash loader file is not available, copy from following location to Keil install directory
mentioned above:
<User_Directory>:
\
FM0+ S6E1C-Series Starter Kit_Ver01
\Firmware\Demo
Projects\<Project>\ARM\flashloader\S6E1C32X0.FLM
1. Launch Keil µVision IDE v5.16a (or later).
2. Click
Project
Open Project
and select the workspace file
s6e1c3_dac.uvprojx
from
<User_Directory>:
\
FM0+ S6E1C-Series Starter Kit_Ver01
\Firmware
\Demo Projects\s6e1c3_adc\ARM
.
3. Click the
Build
icon to build this project.
Summary of Contents for FM0+ S6E1C-Series
Page 49: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 49 Figure A 2 CMSIS DAP USB...
Page 50: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 50 Figure A 3 Stereo Codec...
Page 51: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 51 Figure A 4 Interfaces...
