Installation and Test Operation
FM0+ S6E1C-Series Starter Kit Guide, Doc. # 002-10542 Rev. *C
16
NOR Flash Test
: This procedure tests the NOR flash. Key in
5
and press the
Enter
key,
the code will write a pre-determined set of data into the flash and then reads and
compares to check whether the data is the same. If it is same
,
then it will display
OK
,
otherwise it will display
Fail.
Figure 2-14: NOR Flash Test
Headphone Test
: This procedure tests the headphone channel of the stereo codec. Key
in
6
and press the
Enter
key, a pre-determined calling bell sound will be heard on the
headphone connected to
CN1
.
Figure 2-15: Headphone Test
Microphone Test
: This procedure is to test the microphone channel of the stereo codec.
Key in
7
and press the
Enter
key, you can hear your voice from the microphone on the
headphone.
Figure 2-16: Microphone Test
Note:
Connect a headset with a 4-conductor phone plug (American Headset Jack) to the CN1.
Summary of Contents for FM0+ S6E1C-Series
Page 49: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 49 Figure A 2 CMSIS DAP USB...
Page 50: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 50 Figure A 3 Stereo Codec...
Page 51: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 51 Figure A 4 Interfaces...
