![background image](http://html1.mh-extra.com/html/cypress/fm0-s6e1c-series/fm0-s6e1c-series_manual_2706168027.webp)
Hardware
FM0+ S6E1C-Series Starter Kit Guide, Doc. # 002-10542 Rev. *C
27
3.3.12 Jumpers for Current Measurement
Wire jumpers jp11 and jp12 are used for connecting the 3V3 supply for FM0+ S6E1C3 MCU and
peripherals respectively. The jumper J5 is in parallel with jp11.
Figure 3-10: Power Supply Connection
The power supply connection shown above enables customer to measure the current that FM0+
S6E1C3 MCU consumes. Open the jumper jp11 and connect an ammeter at the terminals of J5
as shown in
Figure 3-11: Current Measurement
The user can recover the connection of 3V3 wire by closing J5 with a jumper after current
measurement.
Summary of Contents for FM0+ S6E1C-Series
Page 49: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 49 Figure A 2 CMSIS DAP USB...
Page 50: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 50 Figure A 3 Stereo Codec...
Page 51: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 51 Figure A 4 Interfaces...