Installation and Test Operation
FM0+ S6E1C-Series Starter Kit Guide, Doc. # 002-10542 Rev. *C
15
RGB LED Test
: This procedure tests the RGB LED. Key in
2
and press the
Enter
key,
the RGB LED color will change from red to green to blue.
Figure 2-11: RGB LED Test
SW2 Key Test
: This procedure tests the switch SW2. Key in
3
and press the
Enter
key,
the test routine will detect the press and release status of the SW2 switch.
Figure 2-12: SW2 Key Test
Potentiometer Test
: This procedure tests the potentiometer. Key in
4
and press the
Enter
key. The ADC value will be displayed on the terminal. Turn the potentiometer
(RP1), the ADC value will change accordingly.
Figure 2-13: Potentiometer Test
Summary of Contents for FM0+ S6E1C-Series
Page 49: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 49 Figure A 2 CMSIS DAP USB...
Page 50: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 50 Figure A 3 Stereo Codec...
Page 51: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 51 Figure A 4 Interfaces...
