Software Development
FM0+ S6E1C-Series Starter Kit Guide, Doc. # 002-10542 Rev. *C
46
4. Check the COM Port number in the Windows Device Manager.
5. Launch the FLASH USB DIRECT Programmer from Windows
Start Menu
>
All Programs
>
Cypress
>
FLASH USB DIRECT Programmer
>
USBDirect
6.
Select “Target MCU” to
MB9AF312K
.
7. Select the Motorola-S format file or Intel-HEX format file to be programmed to FLASH
memory in the MCU. The Hex file is included in the following directory:
<User_Directory>:\FM0+ S6E1C-Series Starter Kit_Ver01\Firmware
\CMSIS-DAP
8. Enter the Virtual COM Port listed in the Ports of Device Manager in
COM
box.
9. Click the
Full Operation (D+E+B+P)
button to start programming.
Summary of Contents for FM0+ S6E1C-Series
Page 49: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 49 Figure A 2 CMSIS DAP USB...
Page 50: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 50 Figure A 3 Stereo Codec...
Page 51: ...Appendix FM0 S6E1C Series Starter Kit Guide Doc 002 10542 Rev C 51 Figure A 4 Interfaces...
