Cynosure Cynergy, Technical Manual

Page: 21 / 194

Cynergy Technical Guide 850-1265-000, Rev. 4 19 of 112
Operating Modes, Service
The above descriptions pertain to the User Mode Program that incorporates safety features, error
and warning codes, feed back control of the settings and insures accurate calibrations. Two other
modes of operation are Testall and CV (Constant Voltage).
Testall allows service personnel to turn on and off individual or groups of functions for test
purposes. CV displays the voltage and does not calibrate to a set fluence, but allows operation at
a set voltage. Both have many of the safety features defeated and are only used by service
personnel.
Accessing Testall Mode
1. Attach a laptop as detailed in “Appendix A” starting on page 111.
2. Turn on the laser and press “q” and press enter to access the DOS prompt.
3. Type “TN” and then enter to access Testall Mode.
Accessing CV Mode
1. Attach a laptop as detailed in “Appendix A” starting on page 111.
2. Turn on the laser and press “q” and press enter to access the DOS prompt.
3. Type “CV” and then enter to access CV Mode.