Cynosure Cynergy, Technical Manual

Page: 126 / 194

Cynergy Final Test and Calibration Procedure Doc #991-4906-000
Page 7 of 28
Rev 5
10 Calibrate Touch Screen
10.1 Power on laser
10.2 Type < tscal> from the “C:\” prompt. Follow the displayed instructions, verify that each time a
coordinate is touched and released, display blinks. Complete the touch screen calibration.
11 Load Software, Serial#, Set Time,Date
11.1
Power on laser
11.2
Type < NN> from the “C:\” prompt.
11.3
Wait for prompt to display S:\Software\TestEng.
11.4
Type < cytest >.
11.5
Press key “ 2 ” and follow instructions to update laser software.
11.6
Press key “ 3 ” and enter laser serial #.
11.7
Press key “ 5 ” and enter date.
11.8
Press key “ 6 ” and enter Time.
12 Enable Multiplex Mode
12.1
Power on laser
12.2
Type < NN> from the “C:\” prompt.
12.3
Wait for prompt to display S:\Software\TestEng.
12.4
Type < cytest >.
12.5
Press key “ 4 ” to Enable Multiplex option.
13
Zero DYE Lamp Counter
13.1
Power on laser and go to the C:\.
13.2
Type < TN> from the “C:\” prompt (TESTALL mode).
13.3
Prompt the MENU screen by pressing < Space > on the keyboard.
13.4
Press lower case letter ‘ w’ on the computer keyboard ( set wavelength to 0 DYE).
13.5
Press lower case letter ‘ q’ on the computer keyboard.
13.6
Press upper case letter ‘ Z’ on the computer keyboard (Zero DYE flashlamp counter).
13.7
Press upper case letter ‘ Q’ on the computer keyboard.
13.8
Press upper case letter ‘ Z’ on the computer keyboard. (Zero DYE counter)
14 Zero YAG Lamp/Rod Counter
14.1
Press lower case letter ‘ w’ on the computer keyboard ( Set wavelength to 1 YAG).
14.2
Press lower case letter ‘ q’ on the computer keyboard.
14.3
Press upper case letter ‘ Z’ on the computer keyboard (Zero YAG flashlamp counter).
14.4
Press upper case letter ‘ Q’ on the computer keyboard.
14.5
Press upper case letter ‘ Z’ on the computer keyboard. (Zeros YAG Rod counter)