CynkoMet N-233 Series, Instructions For Use And Operation

Page: 66 / 149

Cynko Met
N-233
Page 66
Figure 17. Wired air filter
CAUTION!
CAUTION!
Before demounting the air filters, reduce the pressure in the
brake system.
6.4 Handling of the hydraulic system of the rear wall and brakes.
Always follow the principle that the oil in the spreader hydraulic
system and the oil in the external hydraulic system of the tractor are to
be of the same type. The use of different types of oil is not permitted.
The hydraulic system is optional in the case where the spreader is
equipped with a hydraulic brake system and rear gate.
The hydraulic system of the spreader should be completely tight.
Checking the tightness of the hydraulic system:

connect the spreader to the tractor;

engage the hydraulic cylinder or motor;

hold in maximum extension position for 30 seconds, and check
the system for leaks.
If oil leaks are detected, take one of the following steps:

tighten the connector,

replace the connector,
filter cover protection
filter lid