CynkoMet N-233 Series, Instructions For Use And Operation

Page: 44 / 149

Cynko Met
N-233
Page 44
CAUTION!
CAUTION!
Take special caution while the machine is working. Do
not insert limbs into hazardous areas. Adhere to the
markings on the spreader (pictograms).
After completion of the test drive / start-up, check the tightness of
the nuts of the driving wheels, with the engine switched off (key
removed from the ignition), parking brake secured in the spreader.
CAUTION!
CAUTION!
Careless and improper use and operation, as well as non-
compliance with the recommendations contained in this
manual pose a threat to life and health.
4.3.2 Preparation for the spreader’s work.
In preparation for the spreader’s work, the following should be
checked:

the wear and condition of the tires and driving wheels,

Air pressure in the tires,

condition of the drive axle,

tightening of the driving wheels to wheel hubs and the condition of other
threaded joints.
CAUTION!
CAUTION!
Before each maneuver of reversing and start of
spreading the material loaded on the loading crate, use
of the beep signal 2 times is recommended in the tractor
in order to inform bystanders about the threat.
CAUTION!
CAUTION!
Presence of third parties between machines is absolutely
prohibited at the time of aggregation of the spreader to
the tractor. Failure to follow these instructions and
perform the maneuver correctly can lead, in extreme
cases, to death of the person who are between the
spreader and the tractor.