CynkoMet N-233 Series, Instructions For Use And Operation

Page: 2 / 149

Cynko Met
N-233
Page 2
CAUTION!
The manufacturer reserves the right to introduce, in the
manufactured machines, structural alterations facilitating servicing and
improving the quality of their work. The information on significant design
changes are communicated to the user by means of enclosed
information (annexes).
Comments and observations about the design and operation of the
machine should be sent to the manufacturer. This information will allow
objective evaluation of the machine, and serve as guidelines in their
further modernization.
CAUTION!
CAUTION!
Before the operation, the user should be familiar with
this manual and follow all recommendations. This will
ensure safe maintenance and trouble-free operation of the
machine.
According to the Regulation of the Minister of Infrastructure of 31
December 2002 on the technical conditions of vehicles and obligatory
equipment, the manufacturer announces that the agricultural tractors
and low-speed vehicles, and trailers designed to connect with these
vehicles should be marked with a distinctive plate (section 3.6, figure 2).
The plates are not required when the vehicle is included in the kit and is
the last vehicle in the set.
In accordance with the above Regulation, the manufacturer has
equipped the spreader with a plate holder.
The N-233 spreader complies with the rules of moving on public
roads by machines with a speed of up to 30[km/h] (Act on Road Traffic
Law of 20 June 1997). . The manufacturer also claims that the supplied
spreader cannot be moved faster on public roads than the above-
indicated speed.