CynkoMet N-233 Series, Instructions For Use And Operation

Page: 47 / 149

Cynko Met
N-233
Page 47
4.3.4 Loading the spreader.
Loading of the spreader should take place after proper
connection of the machine to the tractor, with the tractor engine
off and the parking brake engaged in both the tractor and the
spreader. Loading should be carried out while the spreader is
resting on a horizontal plane and stable ground. Loading may be
performed by means of additional machines (e.g. tractor with
front loader).
CAUTION!
CAUTION!
Loading is to be performed in such a way that the material
loaded onto the cargo bed is evenly distributed.
CAUTION!
CAUTION!
The user is strictly required to check that there are not
solid bodies in the material loaded onto the spreader, such
as stones, pieces of wood, metal parts, wires, etc. Failure
to comply with this requirement may result in permanent
damage to the machine's structure and void the warranty,
as well as in injury to bystanders or animals caused by
such elements.
4.3.5 Connecting and disconnecting with the tractor.
The spreader can be connected to the agricultural tractor, if all
connections (electrical, pneumatic, hydraulic), and the hook in the
agricultural tractor comply with the requirements of the manufacturer of
the spreader and the tractor.
In order to connect the spreader to the tractor, perform the
following steps:

check whether the spreader's parking brake is engaged.

set the drawbar at the height of the tractor's transport hitch by adjusting
the drawbar’s bracket.

reversing the tractor, couple the end of the drawbar to the proper
transport hitch on the tractor.